› Bearing/Seal technology › Rod Ends, Bearings › Axial Shaft Seals › Type VI - internal seal

| Standard sizes |  Special sizes  |

Standard sizes - Type VI..

Internal seal for oil and grease

 

The seal usually employed in a stationery manner, i.e. with a rotating shaft. Care should be  taken  to  ensure  that  the
sealing lip does not run dry. Should this be unavoidable, please contact us.

By increasing the spring force, it is possible to raise the medium pressure by up to 50%, however this can result in greater friction and heat-up, and consequently in fast-er wear

 

 

 

A = contact pressure force
Type Shaft
Ø		 di da d3 b Max. speed
[min.-1]
Perbunan / Viton		 A
[N]		 Max. pres. [Pa] Match-up to the antifriction bearing series
 6000     6300      6400      4200      4300
 6200
VI 100 10  11,0 
±0,6 		 24
+0,15/+0,30 		 12,5
±1,0 		4,0
+0,25/-0,20		  25 400  38 000 3,0 9000  6000  6300 ------ ------ ------
VI101 12 13,0
±0,6		 26
+0,15/+0,30		 14,7
±1,0		 4,0
+0,25/-0,20		 23800 35700  3,5 9400 6001 ------ ------  4200A ------
VI102 15 16,0
±0,6		 30
+0,15/+0,30		 17,5
±1,0		 4,5
+0,25/-0,20		 19200 28800 4,0 9500 6002 ------ ------ ------  4301A
VI103 17 18,0
±0,6		 33
+0,15/+0,30		 19,5
±1,0		 4,5
+0,25/-0,20		 17500 26200 2,5 8800 6003 6302 ------ ------ ------
VI104 20 22,0
±1,0		 39
+0,15/+0,30		 24,0
±1,0		 4,5
+0,25/-0,20		 14700 22000 4,5 6900 6004 6304 6403 ------ ------
VI105 25 27,0
±1,0		 44
+0,15/+0,30		 28,0
±1,0		 4,5
+0,25/-0,20		 13000 19500 7,5 6150 6005 ------ 6404 ------ ------
VI106 30 32,0
±1,0		 50
+0,15/+0,30		 33,9
±1,0		 5,0
+0,25/-0,20		 10600 15900 11,0 5800 6006 ------ 6405 ------ ------
VI107 35 37,0
±1,0		 56
+0,20/+0,35		 39,0
±1,0		 5,0
+0,25/-0,20		 9300 13900 7,0 6100 6007 6306 6406 4206A ------
VI108 40 42,0
±1,0		 62
+0,20/+0,35		 44,8
±1,0		 5,5
+0,25/-0,20		 8100 12000 7,0 6550 6008 6307 6407 4207A ------
VI109 45 47,0
±1,0		 70
+0,20/+0,35		 48,5
±1,0		 5,5
+0,25/-0,20		 7200 10800 15,5 5200 6009 6308 6408 4208A ------
VI110 50 52,0
±1,0		 75
+0,20/+0,35		 55,0
±1,0		 6,0
+0,25/-0,20		 6600 9900 7,0 4750 6010 6309 6409 4209A ------
VI111 55 58,0
±1,0		 83
+0,20/+0,35		 61,4
±1,0		 6,0
+0,25/-0,20		 6000 9000 10,5 4450 6011 6310 ------ 4210A ------
VI112 60 61,5
±1,0		 89
+0,20/+0,35		 65,0
±1,0		 6,5
+0,25/-0,20		 5500 8200 18,0 3800 6012 6311 6410 4211A ------
VI113 65 67,0
±1,0		 94
+0,20/+0,35		 71,4
±2,0		 7,0
+0,25/-0,20		 5200 7800 13,0 4600 6013 6312 6411 4212A ------
VI114 70 73,0
±1,5		 104
+0,20/+0,35		 76,3
±2,0		 7,5
+0,25/-0,20		 4800 7200 17,5 3800 6014 6313 6412 4213 ------
VI115 75 78,0
±1,5		 109
+0,20/+0,35		 81,0
±2,0		 7,5
+0,25/-0,20		 4500 6700 16,0 4350 6015 6314 6413 4214 ------
VI116 80 83,0
±2,0		 119
+0,20/+0,35		 85,3
±2,0		 8,0
+0,25/-0,20		 4300 6400 17,5 2900 6016 6315 6414 4215 ------
VI117 85 87,5
±2,0		 124
+0,25/+0,45		 91,5
±2,0		 8,0
+0,25/-0,20		 4000 6000 18,0 3500 6017 6316 6414 4216 ------
VI118 90 93,0
±2,0		 132
+0,25/+0,45		 95,8
±2,0		 8,5
+0,25/-0,20		 3800 5700 33,0 3050 6018 6317  6415/16 4217 ------
VI119 95 98,0
±2,0		 137
+0,25/+0,45		 101,5
±2,0		 8,5
+0,25/-0,20		 3600 5400 19,0 3250 6019 6318 6415/16 ------ ------
VI120 100 101,0
±2,0		 142
+0,25/+0,45		 105,4
±2,0		 8,5
+0,25/-0,20		 3400 5100 26,0 3400 6020 6319 6416 4218 ------
VI200 10 11,5
±1,0		 26+0,15/+0,30 13,5±1,0 4,5+0,25/-0,20 24600 36900 2,0 9700 6200 ------ ------ ------ ------
VI201 12 13,3
±1,0		 28+0,15/+0,30 15,6±1,0 4,5+0,25/-0,20 22200 33300 4,0 10700 6201  6300/01 ------ 4201 ------
VI202 15 16,3
±1,0		 31+0,15/+0,30 18,6±1,0 4,5+0,25/-0,20 18200 27300 4,0 12800 6202 6302 ------ 4202 ------
VI203 17 18,3
±1,0		 36+0,15/+0,30 21,0±1,0 5,0+0,25/-0,20 16600 24900 5,5 8100 6203 6303 ------ 4203 4302
VI204 20 21,3
±1,0		 41+0,15/+0,30 23,8±1,0 5,5+0,25/-0,20 14700 22000 4,0 7400 6204 6304 6403 4204 4303
VI205 25 26,3
±1,0		 46+0,15/+0,30 28,3±1,0 5,5+0,25/-0,20 12700 19000 9,0 6400 6205 ------ 6403 ------ 4304
VI206 30 32,0
±1,0		 56+0,20/+0,35 34,7±1,0 6,0+0,25/-0,20 10300 15400 8,0 4900 6206 ------ 6405 ------ 4305
VI207 35 37,0
±1		 65+0,20/+0,35 41,0±1,0 6,5+0,25/-0,20 8900 13300 6,0 3300 6207 6306/07 6405/06 ------ 4306
VI208 40 41,5
±1		 73+0,20/+0,35 46,3±1,0 6,5+0,25/-0,20 7600 11400 12,0 3200 6208 6308 6 407 ------ 4307
VI209 45 47,0
±1		 78+0,20/+0,35 52,0±1,0 6,5+0,25/-0,20 7000 10500 12,0 3000 6209 6308/09 6407/08 ------ 4308
VI210 50 53,0
±1		 83+0,20/+0,35 57,0±2,0 6,5+0,25/-0,20 6400 9600 9,0 3000 6210 6309 6408/09 ------ 4309
VI211 55 58,0
±1		 90+0,20/+0,35 63,0±2,0 7,0+0,25/-0,20 5900 8800 10,0 2750 6211 6310 6409/10 ------ 4310
VI212 60 63,0
±1		 100+0,20/+0,35 66,0±2,0 8,0+0,25/-0,20 5500 8200 9,5 2100 6212 6311 6410/11 ------ 4311
VI213 65 68,0
±1		 110+0,20/+0,35 72,0±2,0 8,5+0,25/-0,20 5000 7500 11,0 2000 6213 6312 6411/12 ------ ------
VI214 70 72,0
±2		 115+0,20/+0,35 75,6±2,0 8,5+0,25/-0,20 4800 7200 9,0 2000 6214 6313 6411/12 ------ 4312
VI215 75 78,0
±2		 120+0,20/+0,35 83,2±2,0 8,5+0,25/-0,20 4400 6600 15,5 2100 6215 6313/14 6413/14 ------ 4313
VI216 80 84,0
±2		 128+0,25/+0,45 89,5±2,0 9,5+0,25/-0,20 4100 6100 14,5 2400 6216 6314/15 6414 ------ 4314
VI217 85 87,0
±2		 138+0,25/+0,45 93,0±2,0 9,5+0,25/-0,20 3900 5800 14,5 2100 6217 6315/16 6414/15 ------ 4315
VI218 90 94,0
±2		 148+0,25/+0,45 98,0±2,0 10,0+0,25/-0,20 3700 5500 16,5 2000 6218 6316 6415/16 ------ ------
VI219 95 98,0
±2		 158+0,25/+0,45 103,5±2,0 10,0+0,25/-0,20 3500 5200 18,5 2000 6219 6317/18 6415/16 ------  6416/17
VI220 100 104,0
±2		 168+0,25/+0,45 110,0±2,0 10,5+0,25/-0,20 3300 4900 21,0 2100 6220 6318/19 6416 ------ ------